RMB2F-rmb6f major ratings and characteristics i f(av) 0.5a , 0.8a features low profile space ideal for automated placement glass passivated chip junction low forward voltage drop low leakage current high forward surge capability high temperature soldering 260 /10 seconds at terminals component in accordance to rohs 2002/95/1 and weee 2002/96/ec mechanical date case: mbf molded plastic over glass passivated chip terminals: solder plated, solderable per j-std-002b and jesd22-b102d polarity: polarity symbols marked on body maximum ratings & thermal characteristics & electrical characteristics (t a = 25 c unless otherwise noted) symbol RMB2F rmb4f rmb6f unit v rrm 200 400 600 v v rms 140 280 420 v v dc 200 400 600 v maximum average forward output rectified current at t a =30 -on glass-epoxy p.c.b (note 1) -on aluminum substrate (note 2) i fsm a v f v i r a t rr 250 ns c j p f (note 1) r j a (note 2) r j a (note 1) r jl t j , t stg note1:on glass epoxy p.c.b. mounted on 0.050.05 (1.31.3mm) pads note2:on aluminum substrate p.c.b. with an area of 0.8 0.8 (2020mm) mounted on 0.050.05 (1.31.3mm) solder pad t rr 150ns,250ns 150 thermal resistance per leg 85 70 20 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load(jedec method) 30 maximum instantaneous forward voltage drop per leg at 0.4a 1.25 maximum rms voltage / w operating junction and storage temperature range ?55 to +150 maximum dc reverse current at rated dc blocking voltage per leg t a = 25 t a = 125 5.0 100 typical junction capacitance per leg at 4.0 v ,1mhz 13 maximum reverse recovery time at if = 0.5 a , ir = 1.0 a , irr = 0.25 a maximum dc blocking voltage i f(av) a 0.5 0.8 maximum repetitive peak reverse voltage v f 1.25v t j max. 150 c i f(av) 0.5a , 0.8a v rrm 200-600v i fsm 30 a i r 5.0 a http://www.trr-jx.com surface mount bridge rectifiers
characteristic curves (t a =25 unless otherwise noted) http://www.trr-jx.com RMB2F-rmb6f surface mount bridge rectifiers
|